MFPC7660 4 Saldhigyada Heerkulbeeye
Faahfaahinta mashiinka
Isticmaalka
Mashiinka ayaa loogu talagalay in lagu soo saaro weelal kala duwan oo balaastig ah, sida saxaarad cunto, saxaarad caag ah, saxaarad isqurxin ah, finan yaryar, xargo, taargooyin iyo waxyaabo kale oo caag ah.
Warqad ku habboon
PVC, PP, PS, OPS, PET, APET, PETG, CPET iwm
Astaamaha Dhismaha
Isku darka makaanikada, pneumatic iyo korantada, dhammaan ficilada shaqada waxaa gacanta ku haya PLC.Shaashada taabashada ayaa ka dhigaysa hawlgalka mid ku habboon oo fudud.
Nooca samaynta: cadaadis iyo vacuum samaynta
Nooca samaynta caaryada kor/hoos
Quudinta matoorka Servo, dhererka quudinta waxaa lagu hagaajin karaa tallaabo-yar.Xawaaraha sarreeya oo sax ah.
Kuleyliyaha sare leh kuleyliyaha 4 qaybood, kuleyliyaha hoose oo leh 3 qaybood kuleyl.Iyada oo kuleyliyaha gees ka hore.
Iyada oo kuleyliyaha gees ka hore.Iska ilaali xaashida jaban.
Kuleyliyaha leh nidaamka xakamaynta heerkulka maskaxda, si toos ah u keena kuleyliyaha kantaroolka kuleyliyaha shaqsiga ah.Kuleyl degdeg ah (3 daqiiqo laga bilaabo 0-400 digrii), kuma dhici doonto danab dibadda ah
Sameynta iyo goynta xarunta furan/dhawrka caaryada ay maamusho servo motor, saxnaanta goynta sare.alaabta si toos ah wax soo saarka xisaabaadka.
Nooca is-dul-saarista: is-uruurinta hoos-u-socod/manipulator-ka-saarista.
Iyada oo leh faahfaahinta alaabta iyo socodsiinta shaqada xafidida xogta.
Iyada oo si degdeg ah nidaamka caaryada isbeddelaya, , ka hufan.
Balaadhka quudinta waxaa lagu hagaajin karaa si isku mid ah ama si madaxbanaan ayaa loo hagaajin karaa habka korantada.
Kuleyliyaha ayaa si toos ah u soo riixaya marka xaashidu ay kululaato.
Si otomaatig ah u rarista xaashida duubista, yaree culayska shaqada.
Qiyaasta Farsamada
| Ballaca xaashida (mm) | 500-800 | |
| Dhumucda xaashida (mm) | 0.2-1.5 | |
| Dhexroorka xaashida ugu badan (mm) | 800 | |
| Samaynta istaroogga caaryada (mm) | Up caaryada 140, Down caaryada 210 | |
| Qufulka caaryada (ton) | 30 | |
| Aagga samaynta ugu badan (mm2) | 760×600 | |
| Aagga samaynta min (mm2) | 500×380 | |
| Samaynta ballaca caaryada (mm) | 500-760 | |
| Samaynta dhererka caaryada (mm) | 460-600 | |
| Moolka/dhererka samaynta ugu badan (mm) | Manipulator: 90/80; Hoos-u-joogista: 175/125 | |
| Awood goynta (ton) | 45 | |
| Jidka is dulsaaran | Hoos-u-joogista/Manipulator-ka-saarista | |
| Waqtiga wareegga (wareegga/daqqo) | Manipulator: Max18; Hoos-u-dhigista: Max30 | |
| Meel qaboojinta | Biyo qaboojinta | |
| Sahayda hawada | Mugga (m3/ daq | ≥5 |
| Cadaadiska (MPa) | 0.8 | |
| vacuum bamka | Busch R5 0100 | |
| Korontada | 3 waji 4 xariiq 380V50Hz | |
| Awood kuleyliyaha (kw) | 150 | |
| Awoodda guud (kw) | 200 | |
| Cabbirka (L×W×H) (mm) | 10040×2600×3400 | |
| Miisaanka (Tan) | ≈12 | |
Qaybaha Farsamada
| PLC Controller | Taiwan Delta |
| Kormeeraha Shaashadda Taabashada (10.4 inch / Midabka) | Taiwan Delta |
| Quudinta matoorka servo (4.5kw) | Taiwan Delta |
| Samaynta kor/hoos u kaca caaryada servo motor (5.5kw) | Taiwan Delta |
| Kuleyliyaha (250pcs) | Germany Elstein ama Ireland Ceramix |
| Xiriiriyaha | Jarmalka Siemens |
| Thermo Relay | Jarmalka Siemens |
| Gudbinta | Jarmalka Weidmuller |
| SSR | Switzerland Carlo Gavazzi |
| Vacuum Pump | Jarmalka Busch |
| Pneumatic | JAPAN SMC |
| Silinder | JAPAN SMC & Taiwan Airtec |
Maxaa noo doora
Taxanaha wax soo saarka ee shirkadda: taxane XC si buuxda otomaatig ah-xawaaraha sare vacuum samaynta mishiinka, XCH taxane filim dhumuc weyn mashiin samaynta, MFC taxane multi station vacuum samaynta mashiinka, HTJ taxane mashiinka goynta.Waxaa lagu dabaqi karaa qaabeynta PET, PVC, PS, PP, biodegradable, PLA, BOP iyo taargooyin kale oo kala duwan.
Tusaalaha Sawirada
Sawirada Konteenarada
